Instruction manual

138 ScreenPRO-II Controller • User’s Guide
4. Menu Orientation
Miscellaneous Menu
Please note the following important points regarding EDID:
• For the computer to correctly see the EDID data:
a. Turn on ScreenPRO-II power.
b. Connect the DVI cable from the computer’s video card to one of
ScreenPRO-II’s DVI connectors.
c. Boot the computer.
d. Once EDID programming is complete, you will be prompted to power
down the external computer, power it back on again, and then ensure
that the computer’s format is set to match.
• A ScreenPRO-II’s EDID prom is not reset to any default during a factory reset. To
change the EDID, you must use the
EDID DVI Input Format Menu.
hÉóé~Ç=_~ÅâäáÖÜí=jÉåì
From the Miscellaneous Menu, press {LIGHT ADJUST} to show the Keypad Backlight
Menu
:
Figure 4-41. Keypad Backlight Menu (sample)
The Keypad Backlight Menu enables you to adjust the backlight level of all buttons on the
ScreenPRO-II Controller.
The following functions are provided:
• Keypad Backlight — adjusts the backlight level. Backlight range is 0 (backlight
off) to
100 (backlight on full).
H
O
M
E
A
D
J
KEYPAD BACKLIGHT
Keypad Backlight 10
B
A
C
K