Instruction manual

208 ScreenPRO-II Controller • User’s Guide
5. System Setup
Input Setup
• Press {BACK} to return to the Input Menu.
c. If a Composite, S-Video or YP
b
P
r
source was selected:
• Scroll to the
Saturation line and adjust as required.
• Scroll to the
Hue line and adjust as required.
• Press {
SAVE} to save the input configuration.
• Press {
BACK} to return to the Input Menu.
11. Repeat from step 5 for the next source that you want to set up.
12. When all sources have been set up for this destination, press {HOME} to return to
the
Home Menu.
13. Press {SAVE} to save the new system configuration in memory.
14. If required, repeat the entire procedure from step 1 for other destinations.
Important
You do not have to repeat the input setup procedure for your
other destinations if either of the following criteria are met:
• Your other destinations use sources that are patched
to the same router.
• Your other destinations are configured using the “ALL
SP
” function on the Input Source Patch Menu.
In this case, all other system destinations will automatically
receive input configuration files via the system’s “copy down”
functionality.
You
do have to repeat the input setup procedure if either of
the following criteria are met:
• Your other destinations use a different router.
• Your other destinations use unique input patching.