Installation manual

5. Installation Adjustment
Image 5-1
5.2 Starting up the Installation Adjustment Mode
How to Start Up the Installation Adjustment Mode?
1. Push the cursor key ↑ or ↓ t o select In stallation and press ENTER to select. (menu 5-5)
A warning will be displayed on the screen. (menu 5-6)
2. In ca se you are a qualified and authorized service person.
Press ENTER to start up the first s tep of t he installation mode: Projector Position.
When entering the installation mode the pr ojector will au tomatically sw itch to the internal pattern.
When the pas sword mode is active you w ill be requested to enter the 4 digit pa ssword.
If no, Press EXIT to return.
ADJUSTMENT MODE
Select a path from below :
IRIS
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 5-5
WARNING
RISK OF ELECTRICAL SHOCK
NO USER ADJUSTABLE PARTS
INSIDE
THE FOLLOWING INSTALLATION
MENUS ARE RESERVED TO, AND
TO BE PERFORMED ONLY BY
BARCO PERSONNEL, OR BARCO
AUTHORIZED DEALERS
If qualified, press
<ENTER> to continue, or
if not, <EXIT> to return
Menu 5-6
5.3 Password Protection
Password Protection
Some items in the Adjustment Mode are pas sword protected. While selecting such an item, the projector asks to enter your pass-
word.
Password P rotection is only available when the password strap on t he co ntroller module is on. Contact a
Barco authorized techn ician when no passw ord is requested during the adjustment procedure and Pass word
Protection is desired.
20 R5976585 BARCO CINE 7 26022003