User guide

3. Display installation

5. Plug the mains connector of the external DC power supply to a grounded power outlet by means of

one of the supplied power cables.

3.5 Routing the cables & Reattach the connec tor compartment

cover

To route the cables

1. Route all connected cables through the cable routing channel in the stand of your display.

Tip: The cable straps at the inside of the connector compartment allow you to ﬁx the cables for better

shielding of the cables.

To Reattach the connector compartment cover

1. Reattach the connector compartment cover by sliding the cover’s bottom in position and then push the

cover’s top. You’ll hear a “click” sound of the cover’s clips when the connector compartment cover is

in position.

K5902060 CORONIS 3MP LED DISPLAY 12/01/2015