User guide
Table Of Contents
- Welcome!
- Table of contents
- What's in the box
- Parts, controls and connectors
- Display installation
- Daily operation
- Advanced operation
- OSD menu position
- OSD menu language
- OSD menu automatic close function
- Power status indicator light
- Key indicator lights
- Power lock function
- Keys sound
- Ethernet over USB
- DDC HID Device
- DPMS mode
- Hibernate
- Luminance target
- Color presets
- Color temperature
- Color coordinates
- Viewing modes
- Display functions
- Ambient Light Compensation (ALC)
- Reading rooms
- Continuous ALC
- Image scaling
- Image source selection modes
- Video input signals
- Video encoding modes
- Grayscale conversion modes
- EDID timings
- Display info
- Display status
- Cleaning your display
- Repackaging instructions
- Important information
24 Coronis Fusion 6MP
Stand-by switching
Switching on the display while it is in stand-by mode or vice versa can
both be done by using the keys or by using the control wheel.
TO SWITCH YOUR DISPLAY ON USING THE KEYS:
1 Light up the keys indicator lights as previously described.
2 While the keys are light up, touch the Stand-by/Cancel key for
approximately 2 seconds.
TO SWITCH YOUR DISPLAY TO STAND-BY USING THE KEYS:
1 Light up the keys indicator lights as previously described.
2 While the keys are light up, touch the Stand-by/Cancel key, a
window pops-up. Press the button again to confirm.
The connected power supply also provides a switch that can be
used to turn the power completely off. To use the display,
please make sure to switch on this power supply. This can be
done by pushing the on/off switch on the power supply into
the "|" position.