User guide
Table Of Contents
- Welcome!
- Table of contents
- What's in the box
- Parts, controls and connectors
- Display installation
- Daily operation
- Advanced operation
- OSD menu position
- OSD menu language
- OSD menu automatic close function
- Power status indicator light
- Key indicator lights
- Power lock function
- Keys sound
- Ethernet over USB
- DDC HID Device
- DPMS mode
- Hibernate
- Luminance target
- Color presets
- Color temperature
- Color coordinates
- Viewing modes
- Display functions
- Ambient Light Compensation (ALC)
- Reading rooms
- Continuous ALC
- Image scaling
- Image source selection modes
- Video input signals
- Video encoding modes
- Grayscale conversion modes
- EDID timings
- Display info
- Display status
- Cleaning your display
- Repackaging instructions
- Important information
Coronis Fusion 6MP 29
OSD menu automatic close function
ABOUT THE OSD MENU AUTOMATIC CLOSE FUNCTION
By default, the OSD menu will disappear automatically after
approximately 90 seconds of inactivity. However, this function can be
disabled so that the OSD menu remains on the screen until manually
closed.
TO ENABLE/DISABLE THE OSD MENU AUTOMATIC CLOSE FUNCTION:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > User Interface > Menu menu.
3 Enter the Automatic Close submenu.
4 Select Enabled/Disabled as desired and confirm.
Power status indicator light
ABOUT THE POWER STATUS INDICATOR LIGHT
By default, when the display is switched on, the power status indicator
light is dimmed. This behavior can be changed so that the power status
indicator light will be blue when the display is switched on.
TO ENABLE/DISABLE THE POWER STATUS INDICATOR LIGHT:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > User Interface > Indicator Lights
menu.
3 Enter the Power Status submenu.
4 Select Enabled/Disabled as desired and confirm.
When the display is in stand-by mode, the power status
indicator light will always turn orange, even when the power
status indicator light is disabled.