User guide
Table Of Contents
- Welcome!
- Table of contents
- What's in the box
- Parts, controls and connectors
- Display installation
- Daily operation
- Advanced operation
- OSD menu position
- OSD menu language
- OSD menu automatic close function
- Power status indicator light
- Key indicator lights
- Power lock function
- Keys sound
- Ethernet over USB
- DDC HID Device
- DPMS mode
- Hibernate
- Luminance target
- Color presets
- Color temperature
- Color coordinates
- Viewing modes
- Display functions
- Ambient Light Compensation (ALC)
- Reading rooms
- Continuous ALC
- Image scaling
- Image source selection modes
- Video input signals
- Video encoding modes
- Grayscale conversion modes
- EDID timings
- Display info
- Display status
- Cleaning your display
- Repackaging instructions
- Important information
34 Coronis Fusion 6MP
Hibernate
ABOUT HIBERNATE
Enabling hibernation will not only switch off the backlight but will also
force the display to disable other functionalities so that power
consumption is further reduced to a minimum. This happens after a
specific period of time which can be manually adjusted.
TO ENABLE/DISABLE HIBERNATION ON YOUR DISPLAY:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Power Management menu.
3 Enter the Hibernate submenu.
4 Select Enabled/Disabled as desired and confirm.
TO SPECIFY THE HIBERNATE TIMEOUT:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Power Management menu.
3 Enter the Hibernate Timeout submenu.
4 Set the timeout value as desired and confirm.
Hibernate can only be enabled on your display when the DPMS
mode is enabled first. Therefore, please refer to “DPMS
mode” on page 33 to do this.