User guide
Table Of Contents
- Welcome!
- Table of contents
- What's in the box
- Parts, controls and connectors
- Display installation
- Daily operation
- Advanced operation
- OSD menu position
- OSD menu language
- OSD menu automatic close function
- Power status indicator light
- Key indicator lights
- Power lock function
- Keys sound
- Ethernet over USB
- DDC HID Device
- DPMS mode
- Hibernate
- Luminance target
- Color presets
- Color temperature
- Color coordinates
- Viewing modes
- Display functions
- Ambient Light Compensation (ALC)
- Reading rooms
- Continuous ALC
- Image scaling
- Image source selection modes
- Video input signals
- Video encoding modes
- Grayscale conversion modes
- EDID timings
- Display info
- Display status
- Cleaning your display
- Repackaging instructions
- Important information
Coronis Fusion 6MP 37
Color coordinates
ABOUT COLOR COORDINATES:
It is possible to change the color coordinates of your display.
TO CHANGE THE COLOR COORDINATES:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Calibration > Color Settings
menu.
3 Enter the Color Definition submenu.
4 Select Color Coordinates and confirm.
5 Enter the X and/or Y submenu.
6 Set the coordinate value for X and/or Y as desired and confirm.
Color coordinates can only be changed on your display when
color presets is set to user. Therefore, please refer to “DPMS
mode” on page 33 to do this.