User guide
Table Of Contents
- Welcome!
- Table of contents
- What's in the box
- Parts, controls and connectors
- Display installation
- Daily operation
- Advanced operation
- OSD menu position
- OSD menu language
- OSD menu automatic close function
- Power status indicator light
- Key indicator lights
- Power lock function
- Keys sound
- Ethernet over USB
- DDC HID Device
- DPMS mode
- Hibernate
- Luminance target
- Color presets
- Color temperature
- Color coordinates
- Viewing modes
- Display functions
- Ambient Light Compensation (ALC)
- Reading rooms
- Continuous ALC
- Image scaling
- Image source selection modes
- Video input signals
- Video encoding modes
- Grayscale conversion modes
- EDID timings
- Display info
- Display status
- Cleaning your display
- Repackaging instructions
- Important information
38 Coronis Fusion 6MP
Viewing modes
ABOUT VIEWING MODES
The CORONIS FUSION 6MP display can be used in two viewing modes:
TO SELECT A VIEWING MODE:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Calibration menu.
3 Enter the Viewing Mode submenu.
4 Select Diagnostic/Text as desired and confirm.
Diagnostic This mode provides the full calibrated
luminance and is intended for using the
display for diagnostic purposes.
Text In this mode, the luminance is reduced to
approximately half of the luminance. This is
intended for using the display with office
applications such as word processing.
As the CORONIS FUSION 6MP display is intended to be used in a
diagnostic environment, the diagnostic mode should always be
selected.