User manual

english

User’s Guide - Safety InstructionsCR series

User Manual - Safety Instructions

2.6 WEEE INFORMATION

This product conforms to all requirements of the EU Directive on waste electrical and elec-

tronic equipment (WEEE). This product shall be recycled properly. It can be disassembled to

facilitate proper recycling of it’s individual parts. This product is using projection lamps that

shall be recycled properly. Consult your dealer or relevant public authority regarding drop-off

points for collection of WEEE.

2.6.1 Turkey RoHS compliance

Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur.

(Republic of Turkey: In conformety with the EEE Regulation)

2.7 ENVIRONMENTAL INFORMATION

2.7.1 Disposal Information

Waste Electrical and Electronic Equipment

This symbol on the product indicates that, under the European Directive 2002/96/EC govern-

ing waste from electrical and electronic equipment, this product must not be disposed of

with other municipal waste. Please dispose of your waste equipment by handing it over to a

designated collection point for the recycling of waste electrical and electronic equipment. To

prevent possible harm to the environment or human health from uncontrolled waste disposal,

please separate these items from other types of waste and recycle them responsibly to pro-

mote the sustainable reuse of material resources.

For more information about recycling of this product, please contact your local city ofﬁce or

your municipal waste disposal service.

For details, please visit the Barco website at: http://www.barco.com/en/AboutBarco/weee

2.7.2 Disposal of batteries in the product

This product contains batteries covered by the Directive 2006/66/EC which must be col-

lected and disposed of separately from municipal waste.

If the battery contains more than the speciﬁed values of lead (Pb), mercury (Hg) or cadmium

(Cd), these chemical symbols will appear below the crossed-out wheeled bin symbol.

By participating in separate collection of batteries, you will help to ensure proper disposal

and to prevent potential negative effects on the environment and human health.

2.8 SERVICE INFORMATION

This product contains no user serviceable parts. If the product fails to function as expected,

please ﬁrst check that all connections are properly made, and that the power cord is properly

connected. Please check that the projector as well as the video and computer sources are all

switched on. Cables and cords may break over time. Try to change cables and cords, in case

there is a bad or intermittent connection. Check if the circuit breaker or fuse of your mains

is intact. In the event of product failure, please contact your reseller. You should prepare a

description of the symptoms of failure you experience. Please also state product number and

serial number as printed on the label on the bottom of the projector.