User Manual

EN55032-CISPR32 Class B ITE (Information Technology Equipment)
This is a c lass B product. In a domestic environment this product may c ause radio interference in which case the user may be required to
take adequate measures.
If this eq uipment does cause interference to radio or television r eception, the user may try to correct the interference by one or m ore of the
following meas ures :
• Re-orientation of the receiving antenna for the r adio or television.
• Relocate the equipment with respect to the receiver.
• Plug the equipment into a different outlet so that the equipment and receiver are on different branch circuits.
• Fasten cables connectors to the e quipment by mou nting screws.
Federal Communication Commission Interference S tatement
You are cautioned that changes or modific ations not expressly approv ed by the part r esponsible for compliance coul
d void the user’s
authority to operate the equipment.
This equipment has been tested and found to com ply with the limits for a Class B digital de vice, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to r adio c omm unications. However, there is no guarantee that interference will not occ ur in a particular installation.
If this equipm ent does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the u ser is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet o n a circuit different from that to w hich the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
You ma y als o fi nd helpful the following booklet, prepared by the FCC: "How to Identify and R esolve Radio-TV Interference Problems." This
booklet is available from the U.S. Government P rinting Office, Washington D.C. 20402.
Changes and Modifications n ot expressly approved by the manufacturer or registrant of this equipment can void your a uthority to operate
this equipment under Federal Communications Commis sions rules.
In order to maintain com pliance with FCC regulations shielded cables must be used with this equipm ent. O peration with non-approved
equipment or unshielded cables is likely to result in interference to radio & television reception.
FCC RF Radiation Exposure S tatement: This device is capable of operating in 802.11a m ode. For 802.11 a devices o perating in the
frequency range of 5.15 - 5.25 GHz, they ar e restricted for indoor operations to red uce any potential harmful interference for Mo bile Satellite
Services (MSS) in the US. W IFI Acc ess Points that are capable of allowing your device to op erate in 802.11a mode (5 .15 - 5.25 GHz ban d)
are optimized for indoor use only. If your W IFI network is capable of operating in this m ode, please restrict your W IFI use indoors to not
violate federal regulations to protect Mobile Satellite Ser vices.
1. This Transmitter must not be c o-located or operating in conju
nction with any other antenna or transmitter.
2. This equipment com plies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipm ent should be installed and operated with a minimum distance of 20 cm between the radiator and y our body.
Base Unit F CC ID: 2AAED-R9861520
Button F CC ID (model R9861006D01): XF6-RS9110N1103
Button FC C ID (model R9861500D01): 2AAED-R9861500D01
ClickShare Button R9861500D0 1 has been tested and mee ts the FC C RF exposure guidelines.The maximum SAR v alue reported is
0.915W/kg.
Canada, Industry C anada (IC) Notices
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject t o the following t wo conditions: (1) this
device may not cause interference, and (2) this device must accept any interfer ence, including interference that may cause undesired
operation of t he device.
Radio Frequency (RF) Exposure Information
The radiated output po wer of the Barco Wireless Device is b elow the Industry Canada (IC) radio frequency exposure limits. The Barco
Wireless Device should be used in such a m anner such that the potential for human contact d uring n ormal operation is minimized.
Caution: Exposure to Radio Frequency Radiation.