User Manual

2. CSE-200 Specifications

Status LED ring

The color of the LED at the front of the Base U nit give information on the status of the system.

LEDs behavior Explanation

static red

• receiving content from the B uttons and streaming towards the display.

• pairing and software update of the Button is do ne. You can now unplug the

Button from the B ase Unit.

• during the ﬁrst phase of the B ase Un it boot process.

blinking w hite

• system is s tarting up ( during the second phase)

• Button pairing is in progress

• software u pdate of the B ase Unit

breathing white

• ECO standby mode

static white

• awake and ready ( i.e. showing the welc ome mess age on the display)

• pairing is done

red blinking

• an e rro r occurred

dark

• deep standby/off

Standby button

The button at the front of the Base Un it has a standby function once the Base unit is pow ered

• When the system is in norm al operational mode, a push makes the system goes to a pre-de ﬁned standby mode.

• When the system is in a standby mode, a push triggers the system to start up and to go to norm al oper ational mode.

Back layout of the Base Unit

The connection panel is situated at the back of the Base unit.

Image 2-3

Backside B ase Unit

8 R5900023 CLICKSHARE CSE-200 24/05/2017