User Manual

4. CSE-200 Installation
4.5 Video signal connections to the Base unit
CAUTION: Make sure the Base Unit is installed properly before co nn ecting.
About Video signal connection
A single screen can be connected to the Base unit.
To connect a display, an H DMI connection should b e made between the Base U nit and the d isplay.
To connect
1. Connect the Base unit to the display using a display cable.
Note: No d isplay cables are included in the ClickShare box at purchase.
Whe n s etting up a display configuration , connect the HDM I cab le to the display. W hen necessary, use an adapter piece to c onnect
to a display port or a DVI port on the display side.
HDMI
Image 4-3
Display connection
4.6 Audio connection
About audio
The ClickShare Button captures the audio output of the user’s laptop and sends it to the Ba se Unit together with the video signal.
The a udio w ill be output at line levels from the mini jack socket (3.5mm), TOSLINK socket and v ia the HDM I connector.
It is up to the us er to decide whether or not to send the a udio signal together with the video signal. The user can decide this by
using the same tools as he would to control the laptop’s speakers or a headphone: the audio c ontrols of the ope rating system (eg for
Windows: Control Panel > Sounds and audio devices) or the physical buttons on the keyboard of their laptop (mute/unmute, lower
volume, higher volume).
There will be synchronization betw een the audio and video signal.
Audio via HDMI
When y our display is connected via HD MI and it supports audio, a sepa rate audio connection is not necessary. The aud io signal is
sent together with the video signal to the dis
play.
How to connect separate audio
1. When using the analog output, connect an audio cable with mini jack (3.5mm) into the analog audio output of the Base Unit.
When using the digital output, connect an fibre optical cable with TOSLINK connector into the digital audio output of the Base
Unit.
2. Connect the other side to the meeting room’s sound system.
Audio output needs to b e selected in th
eConfigurator, for more info, see "Audio settings", page 38.
Sound is not sent out
In s ome Windows environments sound is n ot s ent ou t. This can be solved as follow:
R5900023 CLICKSHARE CSE-200 24/05/2017 17