User Manual

6. CSE-200 Configurator
If you cannot find the IP address (e.g. there is no screen available) you sh ould conn ect to the B ase Unit
directly with your laptop via an E thernet crosso ver cable and access the web interface using the fixed IP
address 192.168.1.23. Make s ure your own LAN ad apter is set in the 192.168.1. range.
To access the Configurator via a direct connection.
1. Connect the Base Unit to your laptop using an Ethernet cable.
2. On your laptop, open a br owser.
Note: Supported browsers are Internet Explorer, Firefox and Safari.
3. Browse to http://192.168.1 .23.
A login screen appears.
4. Enter the user nam e ’admin’ and the pas sword, read and accept the EULA and click OK.
By default the password is set to ’admin’.
The configurator opens.
To access the Configurator via the Base Unit wireless network
1. On your laptop, connect to the Base Unit wireless network.
The default SSID and passwo rd to conn ect t o the B ase Unit are respec tively ’ClickShare-<serial b ase numb er>’ and ’clickshare’.
2. On your laptop, open a br owser.
Note: Supported browsers are Internet Explorer, Firefox and Safari.
3. Browse to h
ttp://192.168.2.1.
A login screen appears.
4. Enter the user nam e ’admin’ and the pas sword, read and accept the EULA and click OK.
By default the password is set to ’admin’.
The web interface opens.
Older laptops might not support the 5 GHz Frequency Band. If your Base Unit is set to that frequency range,
those d evices will not be able to connect to the Base Unit via the wireless network.
Overview of functions
Group Function
Personalization On-Screen ID
Wallpaper
Configuration Files
Display & Audio Display & Audio
Wi-Fi & Network Wi-Fi Settings
LAN Settings
Network integration
Services
Security Compatibility
Secur ity levels
Passwords
System Base Unit Status
Date & Time
Energy Savers
Buttons
Support & Updates Firmware
Troubleshoot
When a setting is changed, always click Save chan ges to store the changes.
28
R5900023 CLICKSHARE CSE-200 24/05/2017