User Manual

6. CSE-200 Configurator
6.4 Meeting room informatio n
About meeting r oom settings
The following settings are possible:
• Meeting room name
• Meeting room location
• Welcome message on the ClickShare screen
• Show meeting room info
• Show network info
• Show source names
Image 6-8
Personalisation, On-Screen ID
Meeting r oom name, location and welcome message
1. LogintotheConfigurator.
2. Click Personalisation → On-screen ID.
3. Click in the input field next to Meeting room name and enter a nam e for the meeting room .
This text is shown on the user’s device when the Button is ready to share ("Ready to share on..."), on the central screen connected
to the B ase Unit and in the list o f A irPlay receivers on the user’s iOS device.
4. Click in the input field next to Location name and enter the location.
5. Click in the input field next to Welcome message and enter the desired message.
Show on-screen information
1. LogintotheConfigurator.
2. Click Personalisation → On-screen ID.
3. Check the check box in front of Show meeting ro
om info.
Checked: meeting room name, location and welcome mess age are displayed on-screen when nothing is shared.
Not checked: n othing is shown on-screen.
4. Check the check box in front of Show network info.
Checked: LAN information such as w ired IP address, h ostname are d isplayed. A lso the Wi-Fi IP address and SSID are displayed.
Not c hecke d: no LA N nor Wi-Fi information is displayed .
5. Check the check box in front of Show source names.
R5900023 CLICKSHARE CSE-200 24/05/2017
33