User Manual

6. CSE-200 Configurator
6.8 Display setup
Resolution
The output res olution to the display is s et on Auto. That means that the CS E-200 output resolution is automatically ada pted to the
resolution of the display. For HDMI displays, a hot plug detection is available.
Screen saver setup
1. LogintotheConfigur ator.
2. Click Display & Audio → Display & Audio.
Image 6-15
Display settings
3. To activate the screen saver, drag the s lider bar to the left or to the right until the desired delay time is reached.
When the s lider is set com pletely to the right, the screen saver w ill never be activated.
6.9 Audio settings
About the audio settings
The audio functionality c an be disabled or enabled. When the enable and/or disable setting is changed, the Buttons must be re-paired
before the setting becomes active.
Image 6-16
Audio settings
How to change
1. LogintotheConfigur ator.
2. Click Display & Audio → Display & Audio.
3. Check or uncheck the check box next to Enable Audio.
38
R5900023 CLICKSHARE CSE-200 24/05/2017