User Manual

6. CSE-200 Configurator
3. To change the IP address or s ubnet mask, click in the input field and enter the 4 oc tets of the new IP address or s ubnet mask.
Note: This m ust NOT be 0.0.0.0 for static IP-Address assignment.
Frequency band & channel
1. Select the w ireless connection channel by clicking on the drop down box and selecting the desired channel.
The channels available in the list vary according to the regional version of your Base Unit. Re-pairing the Buttons is not required
when changing the frequency band or wireless connec tion chann el.
2. Select the wireless connection frequency band: 2.4 GHz or 5 GHz by clicking on the drop down box and selecting t
he correct
band.
Note: Make sure your PC’s wireless interface supports the 5 GHz band before selecting it on the Base Unit.
SSID&passphrase
1. Enter a public name (SSID) for the wireless network.
The default S SID is Click Share-<serial numb er Base Unit>.
2. If you want to broadcast this SSID, check th e checkbox before E nable SSID broadcast.
3. Enter a new WiFi passphrase and confirm that pass phrase.
Signal strength
1. Select the Signal Strength. Click on the slider and reduce the broadcasted power (signal strength) un til the desired strength is
obtained.
Note: Too low power and interference by others m ight lead to connection issues. If so, increase again the signal s trength until
the issues are solved.
By default th e strength is set to 100%.
WebUI access via Wi-Fi
1. To allow access to the configurator via Wi-Fi, check the check box in front of WebUI av ailable via Wi-Fi.
Che cked: Configurator ac cessible via Wi-Fi.
Not checked : acce ss to the configurator via Wi-Fi is blocked.
6.11 LAN settings
About LAN network settings
A network connection can be configured through DH CP or by manuall
y entering a fixed IP address.
DHCP
Dynamic host co nfiguration protocol. DHCP is a com mu nications protocol that lets network administrators ma nage
centrally and automate the assignment of IP a ddresses in an organization’s network. Using the Internet Protocol, each
machine that can connect to the Internet needs a unique IP address. W hen an organization sets up its computer users
with a connection to the Internet, an IP address must be assigned to each machine. Without DHCP, the IP address
must be entered manually at ea ch computer and, if computers m ove to another location in another part of the network,
a new IP address must be entered. DHCP lets a network adm inistrator supervise and distribute IP a ddresses from
a central point and automatically sends a new IP address when a computer is plugged into a different place in the
network.
Hostname & method
1. LogintotheConfigur ator.
2. Click Wi-Fi & Network → LA N Settings.
40
R5900023 CLICKSHARE CSE-200 24/05/2017