User Manual

6. CSE-200 Configurator
Image 6-18
LAN settings
3. Click in the input field next to Hostname and e nter a host nam e for the Base Unit.
The default host nam e is ClickShare-<serial number Base Unit>.
4. To select the method, click on the drop down box next to Method and select the Automatic (DHCP) or Manual.
When Automatic (DHCP) is selected, the IP ad dress, subnet mas k and default gateway fields are grayed out but the currently
used settings are filled out.
5. Click Save changes to apply the settings.
Manual (fixed) IP address
1. Click on the drop down box next to Method and select Manual.
The I P address, subnet and gateway input fields are a ctivated.
2. Click in the input field of the IP addr ess and fill out the 4 octets.
Note: An address contains 4 octets w ith a maximum value of 255.
This must NOT be 0.0.0.0 for static IP-A ddress assignment
3. Click in the Subnet mask input fields and fill out the 4 octets as ap propriate for the local subnet.
4. Click in the Default G ateway input fi elds and fill out the 4 octets. Set the Default-Gateway to the IP-A ddress of the router (MUST
be on the local subnet!).
Note: This m ust NOT be 0.0.0.0.
If there is no router on the local subnet t
hen just set this field to any IP-Address on the subnet.
5. Click Save changes to apply the settings.
Do not use IP address 192.168.2.x for a Subnet mask 255.255.255.0 and IP address 192.168.x.x for a Subnet
mask 255.255.0.0
Use a proxy server
This s etting is important for the auto-update feature of the B ase Unit, which require internet access.
1. Check the check box next to Use a proxy server.
R5900023 CLICKSHARE CSE-200 24/05/2017
41