User Manual

6. CSE-200 Configurator
Image 6-21
Network integration, activation
A setup wizard starts up.
Apps
Once integrated into the network, any m obile device connected to the corporate network will be able to share content with any Bas e
Unit on the network. (If so desired, you can pr ohibit sharing from mobile devices via the B ase Unit’s WebUI.) We advise to enable
passcode authentication for m obile devices. This option can be found on the Wi-Fi & Network > Services page of the Configurator.
You must repair all the Buttons after completing the setup wizard !
6.13 Network integration, EAP-TLS security mode
About EAP-TLS
EAP-TLS (Transport Layer Security) is an EAP m ethod based on certificates which allows mutual au thentication between client and
server. It requires a PKI (Public K e y Infrastructure) to distribute server and client certificates. For some organizations this might be
too big of a hurd le, for those cases EAP-TTLS and PEAP provide good alternatives. E ven though a X.509 client certificate is not
strictly required by the standard it is m andatory in most implementations including for ClickShare. When implemented using c lient
certificates, EAP-TLS is considered one of the most s ecure EAP me thods. The only minor disadv antage, compared to P EA P and
EAP-TTLS, is that the user identity is transmitted in the clear before the actual T LS ha ndshake is per formed. EAP-TLS is supported
via SCE P or manual c ertificate upload.
How to start up for EAP-TLS
1. LogintotheConfigur ator.
2. Click WiFi & Network → Network integration.ClickonChange configu r aton.
3. Select the radio button next
to EAP-TLS and click Next.
44
R5900023 CLICKSHARE CSE-200 24/05/2017