User Manual

6. CSE-200 Configurator
Image 6-28
Network integration, PEAP selected
The PEAP m ode window opens.
Image 6-29
Necessary Data to continue:
Domain The company domain for which y ou are enrolling, should match with the one defined in your
Active Directory.
Identity Identity o f the us er account in the Active Directory which will be used by the ClickShare B uttons to
connect to the corporate network.
Password The corresponding pas sword for the identity that you are using to authenticate on the corporate
network. Per Base Unit each Button w ill use the same identity and password to connect to the
corporate network.
Corporate S SID The SSID of your corporate wire less infrastructure to which the ClickShare Buttons will connect.
Click Next to continue.
When having problems connecting the Button to you r corporate network, to get feedback from the Button please have a look at
the ClickShare Client log. This log can b e pressing the holding Shift key when s tarting the Client executable. Look for the lines
“EDSUSBDongleConnec tion::mpParseDongleMessages”. An error code and a short sum mary of the issue shou ld be logged.
6.16 Network integration, WPA2-PSK security m ode
About WPA 2-PSK
WPA2-PSK does not distinguish between individual users, there is 1 passwo rd (PSK – P re-Shared Key) for all clients c onnecting
to the wireless infrastructure. This ma kes setup ver y straightforward. Once connected, all data transmitted between client and AP
(access point) is encrypted using a 256 bit key.
R5900023 CLICKSHARE CSE-200 24/05/2017
49