User Manual

6. CSE-200 Configurator
Image 6-43
Energy savers
How to change the display timeout and standby mode
1. LogintotheConfigur ator.
2. Click System → Energy Sav ers.
3. To set a display time out, move the slider to the left or to the r
ight until the desired standby timeout is reac hed.
4. To select a standby m ode, select the radio button before E co standby or Deep standby.
6.27 Buttons
About Buttons
It is possible to update the software of the Butt
ons over Wi-Fi. All Buttons used with the Base Unit are indicated in the Buttons
List. The list contains the state, the signal strength, the serial num ber, the firmware version, the number of connections and last
connection.
Image 6-44
Buttons
60 R5900023 CLICKSHARE CSE-200 24/05/2017