User Manual

6. CSE-200 Configurator
How to e nable update over Wi-Fi
1. LogintotheConfigur ator.
2. Click Syst em → Buttons.
3. Check the check box in front of Update Buttons over Wi-Fi.
6.28 Firmware Update
About Software update
The software of the Bas e Unit can be updated via the web interface. The latest version of t he software is available on Barco’s
website.
Image 6-45
Firmware update
About automatic firmware updates
Automatic firmware updates can be triggered in 3 ways:
• triggered via a scheduled time
• triggered at boot
• manual trigger
How to start an Automatic fi rmware update
1. LogintotheConfigur ator.
2. Click Support & Updates → Firmwa re .
3. To check immediately if new software versions are available, click on Check now for updates.
The system chec ks if new firmware is available and uploads this automatically to the Base U nit.
4. To ask a co nfirm ation before ins talling the software update, check the check box in front of Ask confirmation... .
5. To check for new software at boot, c heck the check box Check at boot.
During booting up, whe n new firmware is found, this firm ware will be loaded and the Base Unit will r eboot.
6. To use a schedule, check the check box in front of Check on schedule.
Click on the drop down box and select the desired time slot.
Note: SelectatimeslotwhereyouaresuretheBaseUnitwillnotbeinuse.
R5900023 CLICKSHARE CSE-200 24/05/2017
61