User Manual

8. Troubleshooting
Problem
Cause Solution
ClickShare Base Unit does not start up
correctly
Configuration file is corrupted Browse to the C onfiguration tab of the
Web Interface and press “Loa d D efault
Settings”.
No LA N connection with the Base U nit Wrong IP address IP address is not w ithin your LAN range.
DHCP is not enabled.
No W iFi connection w ith B ase Unit SSID not correct Enter the correct SSID
Locate the problem you are experiencing in the table below and apply the solution.
R5900023 CLICKSHARE CSE-200 24/05/2017
69