User Guide

Driver re-installation, updates or removal
MGP D5 Dicom Theater Lite 105
Driver re-installation, updates or removal
Reinstalling or updating your BarcoMed 2MP2CP driver
Note: These instructions apply to Windows 2000 and Windows
XP.
Important for Windows 2000 or Windows XP users only: If you
previously uninstalled the driver, do NOT allow the Windows Plug
and Play software to reinstall the driver for you.
To reinstall or update only the BarcoMed 2MP2CP driver, follow
the steps described in the section “Using the BarcoMed Product
Installation Wizard” with the following changes.
1. Boot your system, and log in using an account with
administrator privileges.
2. Insert your MGP D5 Dicom Theater Software CD into your
computer’s CD drive. If the “BarcoMed Product Installation
Wizard” doesn’t start within one minute, browse the
contents of your MGP D5 Dicom Theater Software CD and
double click on the file: “Setup.exe” to start the wizard.
The wizard will begin by displaying the screen shown in
figure 43 below.
Figure 43