Instruction manual

6. Advanced
2. Press → to select the Display setup item. (image 6-122)
3. Press ↓ to pull down the Display setup menu.
4. Use ↑ or ↓ to select Soft Edge.
5. Press → to select the Soft Edge item.
6. Use ↑ or ↓ to select Border.
7. Press ENTER to select.
A dialog box will be displayed. The actual Soft Edge border will be displayed.
8. Use ↑ or ↓ to select the desired adjustment.
Image 6-122
Adjusting with the arrow keys.
1. When on an adjustment, use the → or ← key to move the border line to the desired position.
The border line will move in the desired direction and the light output i
n the overlap area will be adapted to. (image 6-123)
Set first the width of the first projector and repeat for the second one. (image 6-124, image 6-125)
104
R5976837 BARCO ID R600/R600+ 21/09/2006