Instruction manual

3. Installation
3.2 Lens installation
3.2.1 Lens installation
How to install ?
1. Take the lens out of its packing material
2. Fix the lens by placing it in the housing (image 3-3)
Note: In case of a m otorized lens the female jack must be in front of the male jack located in the upper-left part of the housing
in the projector
3. Push carefully to lock the lens in the housing
Image 3-3
3.2.2 Removing the lens
How to remove the lens ?
1. Unlock the lens by pulling the handle located on the right side of the projector (image 3-4, image 3-5)
2. Remove the lens out of its housing
Image 3-4
Image 3-5
location of the lens handle
CAUTION: Never transport the projector with the lens mounted on it !
Always remove the lens before transporting the projector.
R5976837 BARCO ID R600/R600+ 21/09/2006 9