Instruction manual

6. Advanced

The image projection can also be interrupted using the PAUSE key on the RCU.

To restart the image : press PAUSE

6.3.2 Freeze

Freezing the image

With the Freeze function, the image can be frozen.

To restart the image, reuse the Freeze function or press the FREEZE button on the remote.

Howtofreezetheimage?

1. Press MENU to activate the Tool bar

2. Press → to select General

3. Press ↓ to Pull down the General menu

4. Use ↑ or ↓ to select Freeze (image 6-8)

5. Press ENTER to activate the Freeze function

Image 6-8

TheimagecanalsobefrozenusingtheFREEZEkeyontheRCU

6.3.3 Standby Timer

Purpose of the Standby Timer

If there is no signal, and the standby timer is enabled, a dialogbox is displayed and the projector will shut down after a determined

time.

The countdown time can be set in a dialog box in a range from 1

80 to 3600 seconds (default value = 300). The Timer can also be

disabled.

How to enable the timer ?

1. Press MENU to activate the Tool bar

2. Press → to select General

3. Press ↓ to Pull down the General menu

4. Use ↑ or ↓ to select Standby Timer (image 6-9)

5. Press ENTER to activate the function

On the screen appears a dialogbox (image 6-10)

6. Use ↑ or ↓ to select Enabled, a box surrounds the selected item, press ENTER to activate

7. Use ↑ or ↓ to browse to the input field

8. Use ←or→ , the numeric keys on the remote or the keypad to change the countdown setting

9. Press MENU or BACK to exit or to go back to the previous

R5976837 BARCO ID R600/R600+ 21/09/2006