Instruction manual

6. Advanced
Image 6-75
Zebraonasinglecolor
Image 6-76
Full color image
Image 6-77
Result image after color keying
The color keying function is only relevant when in presence of the Pro version, although present in the stan-
dard version.
6.5.8 Diagnostics
Diagnostics
1. See the Troubleshoot section in the appendix
6.6 Signal Menu
Overview
• Switching mode
• Background
6.6.1 Switching mode
Switching from one source to another
To minimize undesired effects when switching from one source to another, one can use the Seamless switching mode, beside Seam-
less
switching there is a wide choice of several effects which render the source switching transitions more enjoyable.
How
to select a switching mode ?
1. Press MENU to activate the Tool bar
2. Press → to select the Signal item
3. Press ↓ to Pull down the Signal menu
4. Use ↑ or ↓ to select Switching mode
5. Press → to pull down the menu
6. Use ↑ or
↓ to select the desired switching mode (image 6-78)
7. Press ENTER
A white bullet shows the active effect.
The next source switching will be done using the selected effect
80
R5976837 BARCO ID R600/R600+ 21/09/2006