Instruction manual

6. Advanced
6.8.5 Copy
How to copy a file ?
1. Press MENU to activate the Tool bar
2. Press → to select the Image files item
3. Press ↓ to Pull down the Image files menu
4. Use ↑ or ↓ to select copy (image 6-105)
5. Press ENTER
A dialogbox is displayed (image 6-106)
6. Use ↑ or ↓ to select the desired file
7. Press ENTER
A text box is displayed (image 6-107)
Use ←or →, ↓ or ↑ on the remote, or the keypad to enter the new name, confirm with ENTER.
Image 6-105
Image 6-106
Image 6-107
If the A
utoImage function does not succeed in finding a file and no file is loaded (load list is empty), which
means that the source is not displayed, then use the copy function: Copy a standard file (.std) which is not
too different of the source to display, then edit this file to get the best image.
6.8.
6
Dele
te
How t
o delete a file ?
1. Press MENU to activate the Tool bar
2. Press → to select the Image files item
3. Press ↓ to Pull down the Image files menu
4. Use ↑ or ↓ to select delete (image 6-108)
5. Press ENTER
A dialog box is displayed (image 6-109)
94
R5976837 BARCO ID R600/R600+ 21/09/2006