LC-5621 56" - quad full HD LCD display User manual K5960013-00
Intentionally left blank 2 ________________________________________________________ Barco - LC-5621 - User manual
About the manual 1 About the manual 1.1 Contents of the user manual This manual consists of the following chapters: Chapter 1: About the manual Chapter 2: Important notice Chapter 3: Safety precautions Chapter 4: Package and storage Chapter 5: About the product Chapter 6: Installation This chapter describes how the monitor should be installed and connected into the system. It incorporates the pin layout of all the connectors.
About the manual 1.3 Notation convention Following notations are applicable to this manual and should be respected through the manual. WARNING: Warnings – presented in this manual, provide information, which if not adhered to, may result in personal injury or death. CAUTION: Cautions – presented in this manual, provide information, which if not adhered to, may result in damage to the equipment.
Important notice 2 Important notice 2.1 Commercial In Confidence The information contained herein is Barco confidential information. No part of the information contained herein may be disclosed outside of the organization of the recipient, its sub-contractors, and customers in any form or by any means and/or stored in a database or retrieval system without the prior written consent of Barco. 2.
Important notice 2.5 Copyright No parts of this book may be reproduced in any form, by print, photo printing, microfilm or any other means without written permission from Barco NV. This manual could include inaccuracies or typographical errors. Manual change supplements are revised as often as necessary to keep manuals as current and accurate as possible.
Safety precautions 3 Safety precautions 3.1 Safety warning WARNING: Electric shock or fire hazard can be caused if critical components are replaced by nonconforming components. These components are marked in this guide by a with conform types only! 3.2 sign. Replace Product safety notice WARNING: Many electrical and mechanical parts in display units have special safety-related characteristics.
Package & storage 4 Package & storage 4.1 General A safe transport of the units can only be guaranteed if the original undamaged package is used for shipping. Handle with care when transporting. Keep your original packaging. It is designed for this unit and is the ideal protection during transportation. 4.2 Procedure in case of damaging All shipments should be opened and inspected for concealed damage or pilferage as soon as possible after the arrival at destination.
About the product 5 About the product 5.1 Product description 5.1.1 LC-5621 Barco’s LC-5621 display has been specifically designed for us in dedicated professional applications. The display features quad full High Definition (3840x2160) and delivers crisp, clear and color-accurate perfect images on a large display size with 56” diagonal. With the 56” Quad-HD display, operators benefit from a large display surface without having to compromise on image quality or accuracy.
About the product 5.2 Recommended use 5.2.1 General precautions for all units For optimum performance, please note the following when setting up and using the unit(s). • Allow adequate ventilation in case the configuration is built in a rack or a console, so that the heat can properly dissipate. • Make sure all units are disconnected from mains before connecting the signals.
Installation 6 Installation 6.1 Mounting procedure 6.1.1 LC-5621 mounted on stands The unit is standard mounted on two stands on the rear of the unit. The stands use the VESA mounting holes foreseen in the unit. The stands can be mounted on two ways as shown in the drawing below.
Installation 6.1.2 LC-5621 with VESA compliant mounting solution The LC-5621 can be mounted on an arm compliant to the VESA MIS F, 800, 400, 8 standards. The LC-5621 can also be mounted on a wall or ceiling according to the VESA MIS F, 800, 400, 8 standards.
Installation 6.2 Connecting the signals 6.2.
Installation 6.2.2 Detailed connector information 6.2.2.1 Power connector IEC connector layout POWER 100 - 240 VAC Figure 4: Power connector Power ranging Automatic selection between the following voltage ranges: • 90Vac – 140Vac (100V and 115V nominal) • 180Vac – 264Vac (230V nominal) • Frequency: 45 – 65Hz Mains Fuse inside the unit (T 6.3 A H), for fuse replacement procedures, refer to the maintenance manual of the unit.
Installation 6.2.2.
Installation 6.2.2.
Installation 6.3 First installation 6.3.1 Case 1: Customer buys NVIDIA Quadro FX 4600 6.3.1.1 System requirements Minimum system requirements for using a NVIDIA Quadro FX 4600: 6.3.1.
Installation 6.3.1.3 Downloading the correct drivers NOTE: Before you install the LC-5621, use an additional LCD monitor to install the drivers to the workstation. First the correct driver should be installed on your system. Go to http://www.nvidia.
Installation Check the checkbox and push the “Download Now” button. Now the driver should be downloaded on your system. 6.3.1.4 Installing the drivers Install the driver of the NVIDIA Quadro FX 4600 by double clicking the icon on your desktop. Following image appears on the screen: Accept the license agreement and click “Next”.
Installation Click “Next”. Following screen appears on the screen, click “Next” to install the drivers to your computer.
Installation Select “Yes, I want to restart my computer now”. Click “Finish”. It is possible that the computer doesn’t restart automatically. If needed, restart the computer manually.
Installation 6.3.1.5 Connecting the LC-5621 to the workstation NOTE: Switch the additional LCD screen with the LC-5621. Put DVI-D Master of the unit to the master DVI connector on the graphics card closest to the motherboard. Put DVI-D Slave of the unit to the slave DVI connector on the graphics card furthest from the motherboard. When the computer is restarted, the following screen appears on the right side of the unit. The left side of the unit is black. Click “Next” to continue.
Installation Select “Custom setup” and click “Next”. Following screen appears on the screen. Select “Color LCD (1 of 2) and click “Next”.
Installation Following screen appears on the screen. Select the screen resolution and Color quality as shown on the image above. Click “Next”. Following screen appears on the screen.
Installation Click “Next”. Following screen appears on the screen. Choose “Span” and click “Next”.
Installation Following screen appears on the screen. Click “Finish”. Now the left side of the unit and the right side of the unit show the total picture.
Installation 6.3.2 Case 2: Workstation delivered by Barco When the workstation (PWS-101) is provided by Barco, the NVIDIA Quadro FX 4600 will be installed on this work station. The correct drivers of this graphics card will be installed. The unit can be attached directly to the workstation. Connect the unit with the master DVI-D connector to the master DVI connector of the graphics card. This is the DVI connector closest to the motherboard (as shown on the picture below).
Operation 7 Operation 7.1 Function of primary controls and indicators 7.1.1 Primary controls 7.1.1.1 Location of the primary controls 1 SOURCE 2 MODE 3 ENTER 4 /+ 5 /- 6 MENU 7 1 Standby 2 Source 3 Mode 4 Enter 5 Up 6 Down 7 Menu Figure 7: Primary controls of the LC-5621 7.1.1.2 Standby button Pressing this button puts the display in standby mode.
Operation 7.1.1.3 Source button SOURCE Pressing this button adjusts the gamma settings of the display. 7.1.1.4 Mode button MODE Pressing this button shows information on the display. 7.1.1.5 Enter button ENTER Pressing this button enables the user to select/activate the menu item when the OSD menu is activated. 7.1.1.6 Up/Down buttons /+ /- Pressing this buttons will navigate the “cursor” through the OSD menu when active or increase/decrease the selected value in the OSD. 7.1.1.
Operation 7.1.2 IR control 7.1.2.1 Location of the primary controls on the IR control 2 1 3 F3 F2 F4 F1 F5 ADJ EXIT ENTER 6 PAUSE 5 7 TEXT ? 9 4 PHASE 0 7 8 5 6 3 4 1 2 SHARPN 1 F1 (Source) 2 F2 (Mode) 3 ADJ (Menu) 4 EXIT (Menu) 5 ENTER (Enter) 6 Stand-by 7 Up/Down TINT COLOR BRIGHTN COLOR TREBLE BALANCE BASS VOL Figure 8: Location of the primary controls on the IR control 7.1.2.
Operation 7.1.2.6 Enter button (IR control) ENTER Pressing this button enables the user to select/activate the menu item when the OSD menu is activated. 7.1.2.7 Standby button (IR control) Pressing this button puts the display in standby mode. Standby mode means that the power to the LCD panel and backlight is disabled and that all power consumption is reduced to a strict minimum. The display turns black. To bring the unit out of this mode, press the button again. Power is restored immediately. 7.1.
Operation 7.1.3.
Operation 7.2 Adjusting display settings 7.2.
Operation 7.2.2 Using the on screen display 7.2.2.1 Overview of the key functions Before depicting the OSD menus we will give an overview of the key functions. Entering one of these menus via control panel? • Press • Press • Press MENU /+ , the OSD main menu appears on the screen. or ENTER /- until the desired submenu is selected. to enter the desired submenu. Quitting a menu? • To quit a menu push • Remark: MENU MENU . from the main menu closes the OSD.
Operation ENTER ENTER MENU ADJ /+ /- MENU EXIT 7.2.2.2 Main menu Figure 11: Main menu The main menu enables the user to scroll through the different menu items of the display. 7.2.2.3 Brightness menu Figure 12: Brightness menu To enter the brightness menu, push Push /+ or /- ENTER . The brightness bar becomes visible. to increase/decrease the brightness value.
Operation Brightness can be adjusted from 0 (minimum light output) to 100 (maximum light output). The default value for brightness is 30. 7.2.2.4 Contrast menu Figure 13: Contrast menu To enter the contrast menu, push Push /+ or /- ENTER . The contrast bar becomes visible. to increase/decrease the contrast value. Contrast can be adjusted from 0 to 100. The default value for contrast is 50. 7.2.2.
Operation 7.2.2.6 Color temp menu Figure 15: Color temp menu In the color temp menu, the different color temperatures can be set. One can choose between following color temperatures: 7.2.2.7 • 5600K • 6500K • 7500K • 8500K • 9300K User color menu Figure 16: User color menu To enter the user color menu, push ENTER . The color bar becomes visible. One can adjust the gain of the red, green and blue components. Push increase/decrease the color value.
Operation 7.2.2.8 Sys info Figure 17: System info This menu shows system information such as horizontal frequency (HF), vertical frequency (VF), resolution (Res), model number (Mdl), firmware version (MVer), FPGA version (FVer) and runtime hours (Hrs). 7.2.2.9 Fan status menu Figure 18: Fan status menu The fan status menu shows the fan speed (RPM) of the different fans and the temperature reading of the thermal sensor in the display.
Operation 7.2.2.10 Language menu Figure 19: Language menu The language of the OSD menus can be set in this menu. The different languages that one can choose are: 7.2.2.11 • English • German • Spanish • Italian • Japanese Misc menu Figure 20: Misc menu One can reset all settings of the display to the factory settings by entering this menu. The display RS-232 address can be adjusted via “Display Addr”.
Troubleshooting 8 Troubleshooting 8.1 Troubleshooting procedure No picture on screen. • The signal cable should be completely connected to the graphics card/computer. • The graphics card should be completely seated in its slot. • Check the power switch should be in the ON position. • Front power switch and computer power switch should be in the ON position.
Technical specifications 9 Technical specifications 9.1 Electro-optical specifications 9.1.1 Panel • a-Si TFT Active Matrix LCD (AM-LCD) – 8 bit/color • Super MVA technology, normally black 9.1.2 Image specifications 9.1.2.1 Screen dimensions • Aspect ratio 16:9 • Screen dimensions: 3 3 9.1.2.2 Screen specifications • 16.8 million colors - 256 gray scales • Typical viewing angle: 3 9.1.2.3 White surface luminance at maximum brightness 3 9.1.2.
Technical specifications 9.1.2.6 Color temperature • color temperatures can be switched between 5600K, 6500K, 7500K, 8500K, 9300K or USER • Typical CIE coordinates are mentioned in the table below x y 0,651 + 0.03 0,332 + 0.03 GREEN 0,269 + 0.03 0,593 + 0.03 BLUE 0,144 + 0.03 0,060 + 0.03 WHITE 0,285 + 0.03 0,293 + 0.03 RED CIE-1931 x,y coordinates are measured 9.1.2.7 Response time (at 25°C ambient) • Rise time (black to white transition): typ.
Technical specifications 9.1.3 Signal inputs 9.1.3.
Technical specifications 9.1.3.2 Control connector 9 pins subD male connector layout 1 5 6 9 Control pinning Pin signal 1 Nc 2 Signal receive 3 Signal transmit 4 Nc 5 GND 6 Nc 7 Nc 8 Nc 9 Nc 9.1.4 Power supply specification 9.1.4.1 115 Vac / 220 Vac (50 ~ 60 Hz) supply 9.1.4.2 • Nominal voltage: 115 Vac or 220 Vac • Operates between 85 Vac – 264 Vac • Frequency range: 50 ~60 Hz Power consumption • 9.1.4.3 Pmax = 500 W Safety • Unit meets: 3 3 9.1.4.
Technical specifications 9.1.5 Human Machine Interface (HMI) 9.1.5.1 On-Screen Display (OSD) 9.1.5.2 • The On-Screen Display (OSD) feature is the ability to display text on top of the input. • The OSD can be used to adjust parameters like brightness, contrast, gamma,… • The OSD menu can be accessed via the IR control. • This information is also accessible form the host processor through the RS232 interface according to the BARCO remote protocol.
Technical specifications 9.2 Mechanical specifications 9.2.1 Dimensions 9.2.2 With stand Without stand Height 866 mm (34.09”) 800.8 mm (31.53”) Width 1345.1 mm (52.96”) 1345.1 mm (52.96”) Depth 300 mm (11.81”) 135.2 mm (5.32”) Weight • With stand: 58 kg (128 lbs) • Without stand: 53 kg (117 lbs) 9.2.3 Mounting specifications 9.2.3.1 VESA compliant mounting solution The LC-5621 is standard mounted on a stand.
Technical specifications USB HUB MAIN POWE R AC IN ON DVI-D (Master) RS232 DVI-D (Slave) OFF Figure 22: LC-5621 Rear view Figure 23: LC-5621 Bottom view Barco - LC-5621 - User manual _______________________________________________________ 47
Technical specifications Figure 24: LC-5621 Side view 48 _______________________________________________________ Barco - LC-5621 - User manual
Technical specifications 9.3 Environmental specifications 9.3.1 Temperature 9.3.1.1 Operating (continuous) 9.3.1.2 9.3.2 9.3.3 • High temp.: + 35°C (+95°F) • Low temp.: + 5° C (+41°F) Storage • High temp.: +55°C (+131°F) • Low temp.: -20°C (-4°F) Altitude/Low pressure • Operating nom. 3000 m • Storage nom. 3000 m Relative Humidity (RH) • Operating & storage: nom 75% @ 35°C (95°F) non-condensing 9.3.4 EMI/EMC 9.3.4.
List of abbreviations for all units 10 List of abbreviations for all units This list of abbreviations is drawn up for all Barco units. Some of these abbreviations are not applicable for the product described in this manual.
List of abbreviations for all units DDR SDRAM Double Data Rate Synchronous Dynamic Random Access Memory DDS Direct Digital Synthesizer DEF-STAN Defense Standard DEI DEInterlacer DIB Digital Input Board Diff Differential DM Display Module DVI Digital Video Interface E EDID Extended Display Identification Data EEPROM (E²PROM) Electrically Erasable and Programmable Read Only Memory EMC Electro Magnetic Conductive EMI Electro Magnetic Immunity ESD Electrostatic Discharge ETI Elapsed
List of abbreviations for all units J JTAG Joint Test Action Group K KEYB Keyboard L LCD Liquid Crystal Display LFC Light Flicker Compensation LRU Line Replaceable Unit LUT Look-Up Table LVDS Low Voltage Differential Signalling LVTTL Low Voltage Transistor-Transistor Logic M MH Mounting Holes MIL Military MHz Mega Hertz MMAN Maintenance Manual MRFD Modular Rugged Flat Display ms Millisecond MTBF Mean Time Between Failures MTTR Mean Time To Repair N N/A Not Applicable NTSC
List of abbreviations for all units RADAR Radio Detection and Ranging RDM Rugged Display Module RFU Reserved for future use RGB Red Green Blue RISC Reduced Instruction Set Computer RM Rack Mounted ROM Read-Only Memory RPM Rotation Per Minute RX Receiver S SBB Symbol Generator Bypass Board SDRAM Synchronous Dynamic Random Access Memory SECAM Sequential Couleur avec Memoire SEL Selection SER Serial Port SG Symbol Generator SGB Symbol Generator Board SIB Signal Interface Board
List of abbreviations for all units TRST Test Reset TRT TRT connectors TTL Transistor-Transistor Logic TX Transmitter U UART Universal Asynchronous Receiver-Transmitter UMAN User Manual UXGA Ultra eXtended Graphic Array V V Volt VCM Video Control Module VESA Video Electronics Standards Association VGA Video Graphic Array VHDL Is the VHSIC Hardware Description Language VHSIC Very High Speed Integrated Circuit VID Video VL Vectorlink VL RX VectorLink Receiver VM Vesa Mounted
Table of contents 11 Table of contents 1 About the manual.............................................................................. 3 1.1 Contents of the user manual............................................................... 3 1.2 Change record .................................................................................. 3 1.3 Notation convention .......................................................................... 4 2 Important notice ..................................................
Table of contents 7.1.1.4 Mode button......................................................................... 29 7.1.1.5 Enter button ........................................................................ 29 7.1.1.6 Up/Down buttons.................................................................. 29 7.1.1.7 Menu button ........................................................................ 29 7.1.2 IR control ........................................................................................ 30 7.
Table of contents 9.1.5.2 Controls .............................................................................. 45 9.1.5.3 Indicators ............................................................................ 45 9.2 Mechanical specifications.................................................................. 46 9.2.1 Dimensions ..................................................................................... 46 9.2.2 Weight............................................................................
List of figures 12 Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure List of figures 1: Location of the stands of the LC-5621 .......................................................... 11 2: Location of the VESA mounting holes ............................................................ 12 3: Connector location LC-5621 .......................................................................
List of figures End of document Barco - LC-5621 - User manual _______________________________________________________ 59
