User guide

12 Nio
Display installation
Unlocking the height mechanism
In the factory, the height-positioning system in the display foot is
blocked with a red clip to prevent damage during transportation.
Before installing the display, you must remove this clip.
Figure 5: Location of the clip
TO REMOVE THE CLIP:
1 Position the display with its rear side facing you.
2 Pull the red clip out of the fixation holes in the foot.
3 Keep the clip in case the display needs to be shipped later.
Prior to installing your BARCO NIO Display and connecting all
necessary cables, make sure to have a suitable display controller
physically installed in your computer. If you are using a Barco
display controller, please consult the dedicated user guide
available on the system CD.
Clip