User guide

Nio 37
ALC & DICOM Options
DICOM offset
INTRODUCTION
The DICOM DF will be recalculated only when another DICOM Offset is
selected. The DICOM DF will be recalculated based on the new offset
setting.
TO SELECT A DICOM OFFSET:
1 Select the DICOM display function. See To select a display
function (DF):, on page 36.
2 Enter the ALC & DICOM submenu.
3 In the ALC & DICOM Options submenu, rotate the control wheel to
select DICOM Offset. Press the control wheel shortly to go into edit
mode.
4 Rotate the control wheel to select an offset.
5 Press the control wheel shortly to activate the selection.
User This is a user-definable DF. Use MediCal
QAWeb to define the DF.