User Manual and Operating Guide

3. Commands
Request
Pos Size Name Description Content
0 1 set PIP posit ion
0xA0
set PIP position (hex)
1 1 set PIP posit ion
0x04
set PIP position (hex)
0x00
top left (hex)
0x01
top right (hex)
0x02
bottom left (hex)
2 1 PIP position value
0x03
bottom right (hex)
3.84 set PIP select, write
About this comma nd
This command sets the PIP select value.
Request
Pos
Size
Name Description
Content
0 1 set PIP sele ct
0xA0
set PIP select (hex)
1 1 set PIP sele ct
0x02
set PIP select (hex)
0x00
HDMI (hex)
0x01
VGA (hex)
0x02
DVI (hex)
0x03
BNC (hex)
2 1 PIP select value
0x04
CVBS (hex)
3.85 set PIP size, write
About this comma nd
This command sets the P IP size.
Request
Pos
Size
Name Description
Content
0 1 set PIP size
0xA0
set P IP size (hex)
1 1 set PIP size
0x03
set P IP size (hex)
0x00
Small (hex)
0x01
Medium (hex)
2 1 PIP size value
0x02
Large (hex)
3.86 set projector power on/off, write
About this comma nd
This comm ands sets the projector on/off.
Request
Pos Size Name Description Content
0 1 set projector power
0x58
set projector power (hex)
R5905746 COMMAND CATALOG 06/01/2014 45