Installation manual

SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
1-7
SAFETY INSTRUCTIONS
1-7
5975069 BARCOVISION 708 MULTIMEDIA 2004985975069 BARCOVISION 708 MULTIMEDIA 200498
When installing the projector and screen, care must be taken to avoid exposure to
ambient light directly on the screen. Avoid adverse illumination on the screen from
direct sunlight or fluorescent lighting fixtures.
The use of controlled ambient lighting, such as incandescent spot light or a dimmer,
is recommended for proper room illumination. Where possible, care should also be
taken to ensure that the floors and walls of the room in which the projector is to
be installed are non-reflecting, dark surfaces. Brighter surfaces will tend to reflect
and diffuse the ambient light and hence reduce the contrast of the projected image
on the screen.
When installing the projector and screen, care must be taken to avoid exposure to
ambient light directly on the screen. Avoid adverse illumination on the screen from
direct sunlight or fluorescent lighting fixtures.
The use of controlled ambient lighting, such as incandescent spot light or a dimmer,
is recommended for proper room illumination. Where possible, care should also be
taken to ensure that the floors and walls of the room in which the projector is to
be installed are non-reflecting, dark surfaces. Brighter surfaces will tend to reflect
and diffuse the ambient light and hence reduce the contrast of the projected image
on the screen.