Installation manual

POWER CONNECTION
POWER CONNECTION
6-2
POWER CONNECTION
6-2
POWER CONNECTION
5975069 BARCOVISION 708 MULTIMEDIA 200498
5975069 BARCOVISION 708 MULTIMEDIA 200498
Power (mains) cord connection
Use the supplied power cord to connect your projector to the wall outlet. Plug the
female power connector into the male connector at the front of the projector.
Input power (mains) voltage.
Power (mains) cord connection
Use the supplied power cord to connect your projector to the wall outlet. Plug the
female power connector into the male connector at the front of the projector.
Input power (mains) voltage.
See installation instructions before
connecting to the supply
V NOM 120/230 Volt
I MAX 5/2.5 AMP
FREQ 60/50 Hz
OF F
ON
See installation instructions before
connecting to the supply
V NOM 120/230 Volt
I MAX 5/2.5 AMP
FREQ 60/50 Hz
OFF
ON
See installation instructions before
connecting to the supply
V NOM 120/230 Volt
I MAX 5/2.5 AMP
FREQ 60/50 Hz
OF F
ON
See installation instructions before
connecting to the supply
V NOM 120/230 Volt
I MAX 5/2.5 AMP
FREQ 60/50 Hz
OFF
ON
Attention
The BARCOVISION 708 MULTIMEDIA - R9002321 and R9002322 leave the factory
to operate on a mains (power) input of 230 Vac.
Adaptation of the power input of the projector from 230 VAC to 120 VAC or vice versa
is possible. Follow the procedure as described below.
Procedure
- Unplug the power cord from the power input on the front panel.
- Remove the front panel by loosening both retaining screws and take off the plastic
cover plate.
Attention
The BARCOVISION 708 MULTIMEDIA - R9002321 and R9002322 leave the factory
to operate on a mains (power) input of 230 Vac.
Adaptation of the power input of the projector from 230 VAC to 120 VAC or vice versa
is possible. Follow the procedure as described below.
Procedure
- Unplug the power cord from the power input on the front panel.
- Remove the front panel by loosening both retaining screws and take off the plastic
cover plate.