Installation manual

INSTALLATION ADJUSTMENTS
INSTALLATION ADJUSTMENTS
7-4
INSTALLATION ADJUSTMENTS
7-4
INSTALLATION ADJUSTMENTS
5975069 BARCOVISION 708 MULTIMEDIA 200498
5975069 BARCOVISION 708 MULTIMEDIA 200498
Installation mode start up
It will be necessary to perform several mechanical adjustments while in the
installation mode. Remove the top cover in order to gain access to the adjustment
points (see Access to controls).
Two possible ways to enter the installation mode :
a) Using the RCU.
Press the ADJUST key.
The projector displays the path selection menu.
b) Using the local keypad.
Press the ADJUST key.
The projector displays the General
access menu.
Use the control disc to highlight
enter ADJUST and press EN-
TER. The path selection menu
will be displayed.
Installation mode start up
It will be necessary to perform several mechanical adjustments while in the
installation mode. Remove the top cover in order to gain access to the adjustment
points (see Access to controls).
Two possible ways to enter the installation mode :
a) Using the RCU.
Press the ADJUST key.
The projector displays the path selection menu.
b) Using the local keypad.
Press the ADJUST key.
The projector displays the General
access menu.
Use the control disc to highlight
enter ADJUST and press EN-
TER. The path selection menu
will be displayed.
GENERAL ACCESS
Select with ,
or
then <ENTER>.
<EXIT> to return
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
3 4
1 2
Enter ADJUST
GENERAL ACCESS
Select with ,
or
then <ENTER>.
<EXIT> to return
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
3 4
1 2
Enter ADJUST