Owner`s manual

Connections
2-3
5976064 BARCOCINE 8 25012000
Connecting a Composite Video source.
Composite video signals from a VCR, OFF air signal decoder, etc..
Note :
If a line doubler or line multiplier is built in, the default position of this line doubler (multiplier) soft option is ON (active). The video input
signal will be displayed as a non interlaced image (= improved image stability).
To enable or to disable this function, enter the adjustment mode and change the position of the ON/OFF toggle switch (see chapter
'Random access' adjustment mode).
1
Input signal Y/C (luma/chroma)
2
Input signal : R, G and B with automatic sync detection between seperate sync (separate composite sync or with separate
Hor and Vert. sync) or sync on green (composite sync).
3
Input signal : R-Y, Y and B-Y with separate composite sync or with separate Hor and Vert. sync or with composite sync on
Y.
4
Input signal : R, G and B with separate Tri level sync or with Tri-level sync on green (optional).
5
Input signal : R-Y, Y and B-Y with separate Tri level sync or with composite Tri-level sync (optional).
* Video or S-Video : switchable in the Picture Tuning menu.
Video input selection :
With the RCU or built-in RCU : press digit button 1
Note
When using the loop-through Video output, then set the termination switch to the 'OFF' position.
Connecting a S-Video or Video source to port 2.
Separate Y-luma/C-chroma signals for higher quality playback of Super VHS signals.
Note :
If a line doubler or line multiplier is built in, the default position of this line doubler (multiplier) soft option is ON (active). The video input
signal will be displayed as a non interlaced image (= improved image stability).
To enable or to disable this function, enter the adjustment mode and change the position of the ON/OFF toggle switch (see chapter
'Random access' adjustment mode).
POWER / MA INS COMM. PORT PORT 3
PO R T 4/ 5 PORT 2
PORT 1 PROJECTOR MODE
POWER / MAINS COMM. PORT PORT 3
PO R T 4/ 5 PORT 2
PORT 1 PROJECTOR MODE