Owner`s manual

Connections
2-7
5976064 BARCOCINE 8 25012000
Connecting a Component source.
(R-Y)Y(B-Y) analog input terminals with sync input or with sync on the luminance (Y) input. The projector detects automatically where
the sync signal is located.
Line doubling or multipling is possible for component video input sources on standard line frequency.
Note :
If a line doubler or line multiplier is built in, the default position of this line doubler (multiplier) soft option is ON (active). The video input
signal will be displayed as a non interlaced image (= improved image stability).
To enable or to disable this function, enter the adjustment mode and change the position of the ON/OFF toggle switch (see chapter
'Random access' adjustment mode).
(R-Y)Y(B-Y)S or (R-Y)Ys(B-Y) input selection (component video input)
With the RCU or built-in RCU : press digit button 6
Connecting a Component source with Tri-level sync.
(R-Y)Y(B-Y) analog input terminals with Tri-level sync input or with Tri-level sync on the luminance input.
POWER / MAINS COMM. PORT PORT 3
PORT 4/5 PORT 2
PORT 1 PROJECTOR MODE
POWER / MAINS COMM. PORT PORT 3
PORT 4/5 PORT 2
PORT 1 PROJECTOR MODE
(R-Y)Y(B-Y)3S or (R-Y)Y3s(B-Y) input selection