Installation manual

4. Installation Setup
Image 4-4
Loosen the 6 screws (3 on each side) locking the hinged cover to the frame
6. Open the cover.
Scan Connector Settings
When changing the horizontal and/or vertical scan, insure that all three connectors are set in the same position. The configuration
of each connector is depending on its orientation i.e. on the position of the reference side of the connector. The position of the scan
connectors for the different mounting configurations can be summarized as follows:
Image 4-5
Scan Connector
s Settings
R5976257 BARCO REALITY 909 15/03/2003 19