Installation manual

6. Source Connections
Image 6-5
Lift up the protection plate
3. The second RGB module is located in the slot 4 of the main frame.
Image 6-6
Location of the second RGB module
4. Press the module locks A and lift up the module handles B on both sides of the module.
Image 6-7
Press the module locks A and lift up the module handles B on both sides of the module
5. Disconnect the mini-connecto
r J3 on the printed circuit board in slot 2, for easy handling, repeat step 4 to lift up this printed circuit
board.
30
R5976257 BARCO REALITY 909 15/03/2003