Installation manual

7. Installation Adjustment Mode
Image 7-16
Loosen the bolts (6x) on the front of the optical block
How to adjust the Scheimpflug for the Green CRT?
1. Equalize now diagonally the focus from left (bottom) to right (top) by turning bolt 01.
Image 7-17
Scheimpflug Adjustment
2. Equalize diagonally the focus from left (top) to right (bottom) by turning bolt 00 of the projected color.
3. Repeat step 1 to 2 for each color.
4. After finishing the Installation Adjustment Procedure, the main menu returns on the screen.
5. Tighten the 6 bolts on the front of the optical block.
To optimize the image focusing, repeat the Optical Lens Focusing.
R5976257 BARCO REALITY 909 15/03/2003 45