User's Manual

3. Getting started
Image 3-16
Pair button
Both the LE Ds of the Button and the LEDs of the Base Unit are blinking white. This means pairing is in progress.
The Base Unit automatically checks whether the software of the Button is up to d ate. If not, the Base Unit updates the Button
software. This may take more time.
During the pairing and update process, a small status bar is display.
Image 3-17
Pairing message
The result of the pairing process can be as follows:
- When the LEDs become static white, the Button is paired to the B ase Unit, but no software update w as ne eded. You can
unplug the Button from the Base Unit.
- When the LE Ds become static red, the Button is paired to the Base Unit and the software update has finished. You can unplug
the Bu tton from the Bas e Unit.
Image 3-18
Pairing finished
2. Unplug the Button from the Base Unit.
The Button is now ready for use.
18
R5900024 CS-100 21/12/2014