User's Manual

3. Getting started
Image 3-15
Speakers ClickShare, default
2. Click on the Speaker icon (3 ).
The Sound window opens.
3. Select the Output tab (4) and activate ClickShare (5).
3.7 Pairing
Pairing o f the Buttons with the Base Unit
To be able to use a B utton it should be assigned to the Base Unit you are using. This process is called pairing. By default, the two
Buttons delivered with the CSE-200 set are already paired to the specific Base Unit.
In case you buy a dditional Buttons or when a B utton should be assigned to another Base Unit, the Button needs to be paired (again).
The B utton software update runs in the ba ckground and will not impact users while us ing the sy stem. If desired, this feature c an
be disabled in the Web Interface. When downgrading or updating to an older version of the Base Unit software the Buttons need to
paired manually to update their s oftware.
A Button can only be paired to one Base Unit at a time.
The B utton will always ma
ke connection to the Base Unit it was last paired to.
To pair a Button to the Base unit
1. Insert the Button in the USB port at the front of the Base Unit you are using.
R5900025 CSE-200 21/12/2015
17