Owner's Manual
Table Of Contents
- User Guide
- 1 Introduction
- 2 Introduction to CSE-200+
- 3 Getting started
- 4 Troubleshooting
- Installation Manual
- 1 Introduction to the Installation Guide
- 2 CSE-200+ Specifications
- 3 Getting started
- 4 CSE-200+ Installation
- 4.1 Installation methods for the Base Unit
- 4.2 Table mounting
- 4.3 Wall mounting
- 4.4 Video signal connections to the Base Unit
- 4.5 Audio connection
- 4.6 LAN connection
- 4.7 Out-of-the-box use
- 4.8 Out-of-the-box use with Ethernet link
- 4.9 Integration in the Enterprise network
- 4.10 Integration in a dedicated Enterprise network
- 4.11 Power connection
- 4.12 Starting up for the first time
- 5 Preparing the Buttons
- 6 CSE-200+ Configurator
- 6.1 Accessing the Configurator
- 6.2 ClickShare Configuration Wizard
- 6.3 On-Screen Language and Text Size
- 6.4 Meeting room information
- 6.5 Personalisation, wallpaper
- 6.6 Personalisation, Personalized wallpaper
- 6.7 Manage configuration files
- 6.8 Display setup, Outputs
- 6.9 Display setup, Inputs
- 6.10 Audio settings
- 6.11 Wi-Fi settings
- 6.12 Wi-Fi settings, Wireless Client
- 6.13 Wi-Fi settings, Wireless Client, EAP-TLS
- 6.14 Wi-Fi settings, Wireless Client, EAP-TTLS
- 6.15 Wi-Fi settings, Wireless Client, PEAP
- 6.16 Wi-Fi settings, Wireless Client, WPA2-PSK
- 6.17 LAN settings
- 6.18 LAN Settings, Wired Authentication
- 6.19 LAN Settings, EAP-TLS security mode
- 6.20 LAN Settings, EAP-TTLS security mode
- 6.21 Service, mobile devices
- 6.22 Service, ClickShare API, remote control via API
- 6.23 XMS Server Integration
- 6.24 Services, SNMP
- 6.25 Services, Remote Button Pairing
- 6.26 Security, security level
- 6.27 Security, passwords
- 6.28 Security, HTTP Encryption
- 6.29 Status information Base Unit
- 6.30 Date & Time setup, manually
- 6.31 Date & Time setup, time server
- 6.32 Energy savers
- 6.33 Buttons
- 6.34 Buttons, External access point
- 6.35 Buttons, External access point, mode EAP-TLS
- 6.36 Buttons, External access point, mode EAP-TTLS
- 6.37 Buttons, External access point, mode PEAP
- 6.38 Buttons, External access point, mode WPA2-PSK
- 6.39 Blackboard
- 6.40 Firmware Update
- 6.41 Support & Updates, Troubleshoot, log settings
- 6.42 Factory defaults
- 7 Firmware updates
- 8 Troubleshooting
- 9 Environmental information
59R5900087 /06 ClickShare CSE-200+
Image 6–3 Start screen
The language of the configurator can be changed on any page in the interface.
The screen is split up in 2 panes. Left pane with the selection buttons and a right pane to configure the
selected function.
The startup screen itself shows:
• the wired IP address
• the wireless SSID
• the number of Buttons connected
• the system state
If you cannot find the IP address (e.g. there is no screen available) you should connect to the Base
Unit directly with your laptop via an Ethernet crossover cable and access the web interface using
the fixed IP address 192.168.1.23. Make sure your own LAN adapter is set in the 192.168.1.x
range.
To access the Configurator via a direct connection.
1. Connect the Base Unit to your laptop using an Ethernet cable.
2. On your laptop, open a browser.
Note: Supported browsers are Internet Explorer, Firefox and Safari.
3. Browse to http://192.168.1.23.
A login screen appears.
4. Enter the user name 'admin' and the password, read and accept the EULA and click OK.
By default the password is set to 'admin'.
The configurator opens. The wired IP address is given on the startup page.
To access the Configurator via the Base Unit wireless network
1. On your laptop, connect to the Base Unit wireless network.
CSE-200+ Configurator