Owner's Manual
Table Of Contents
- User Guide
- 1 Introduction
- 2 Introduction to CSE-200+
- 3 Getting started
- 4 Troubleshooting
- Installation Manual
- 1 Introduction to the Installation Guide
- 2 CSE-200+ Specifications
- 3 Getting started
- 4 CSE-200+ Installation
- 4.1 Installation methods for the Base Unit
- 4.2 Table mounting
- 4.3 Wall mounting
- 4.4 Video signal connections to the Base Unit
- 4.5 Audio connection
- 4.6 LAN connection
- 4.7 Out-of-the-box use
- 4.8 Out-of-the-box use with Ethernet link
- 4.9 Integration in the Enterprise network
- 4.10 Integration in a dedicated Enterprise network
- 4.11 Power connection
- 4.12 Starting up for the first time
- 5 Preparing the Buttons
- 6 CSE-200+ Configurator
- 6.1 Accessing the Configurator
- 6.2 ClickShare Configuration Wizard
- 6.3 On-Screen Language and Text Size
- 6.4 Meeting room information
- 6.5 Personalisation, wallpaper
- 6.6 Personalisation, Personalized wallpaper
- 6.7 Manage configuration files
- 6.8 Display setup, Outputs
- 6.9 Display setup, Inputs
- 6.10 Audio settings
- 6.11 Wi-Fi settings
- 6.12 Wi-Fi settings, Wireless Client
- 6.13 Wi-Fi settings, Wireless Client, EAP-TLS
- 6.14 Wi-Fi settings, Wireless Client, EAP-TTLS
- 6.15 Wi-Fi settings, Wireless Client, PEAP
- 6.16 Wi-Fi settings, Wireless Client, WPA2-PSK
- 6.17 LAN settings
- 6.18 LAN Settings, Wired Authentication
- 6.19 LAN Settings, EAP-TLS security mode
- 6.20 LAN Settings, EAP-TTLS security mode
- 6.21 Service, mobile devices
- 6.22 Service, ClickShare API, remote control via API
- 6.23 XMS Server Integration
- 6.24 Services, SNMP
- 6.25 Services, Remote Button Pairing
- 6.26 Security, security level
- 6.27 Security, passwords
- 6.28 Security, HTTP Encryption
- 6.29 Status information Base Unit
- 6.30 Date & Time setup, manually
- 6.31 Date & Time setup, time server
- 6.32 Energy savers
- 6.33 Buttons
- 6.34 Buttons, External access point
- 6.35 Buttons, External access point, mode EAP-TLS
- 6.36 Buttons, External access point, mode EAP-TTLS
- 6.37 Buttons, External access point, mode PEAP
- 6.38 Buttons, External access point, mode WPA2-PSK
- 6.39 Blackboard
- 6.40 Firmware Update
- 6.41 Support & Updates, Troubleshoot, log settings
- 6.42 Factory defaults
- 7 Firmware updates
- 8 Troubleshooting
- 9 Environmental information
R5900087 /06 ClickShare CSE-200+100
Image 6–47 Time setup
8. Click on the up down arrow of each scroll counter until the correct hour, minutes and seconds are
obtained.
9. Click Save changes to apply.
6.31 Date & Time setup, time server
About using NTP server
The clock is continuously synchronized with an external time server and the deviation is in the order of
milliseconds. Extra time servers can be added.
As long as there is no synchronization with a time server the status is indicated as disabled.
How to setup
1. Log in to the Configurator.
2. Click System → Date & Time.
Image 6–48 Time server setup
The current time is indicated next to Current time.
3. Check the radio button next Use NTP.
4. Enter a NTP server address next to NTP servers. Enter the IP address or server name.
Note: Multiple servers (maximum 5) can be added, separated by a comma.
5. Click Save changes to apply.
A synchronization with the NTP server takes place. The status field indicates the progress.
CSE-200+ Configurator