Owner's Manual
Table Of Contents
- User Guide
- 1 Introduction
- 2 Introduction to CSE-200+
- 3 Getting started
- 4 Troubleshooting
- Installation Manual
- 1 Introduction to the Installation Guide
- 2 CSE-200+ Specifications
- 3 Getting started
- 4 CSE-200+ Installation
- 4.1 Installation methods for the Base Unit
- 4.2 Table mounting
- 4.3 Wall mounting
- 4.4 Video signal connections to the Base Unit
- 4.5 Audio connection
- 4.6 LAN connection
- 4.7 Out-of-the-box use
- 4.8 Out-of-the-box use with Ethernet link
- 4.9 Integration in the Enterprise network
- 4.10 Integration in a dedicated Enterprise network
- 4.11 Power connection
- 4.12 Starting up for the first time
- 5 Preparing the Buttons
- 6 CSE-200+ Configurator
- 6.1 Accessing the Configurator
- 6.2 ClickShare Configuration Wizard
- 6.3 On-Screen Language and Text Size
- 6.4 Meeting room information
- 6.5 Personalisation, wallpaper
- 6.6 Personalisation, Personalized wallpaper
- 6.7 Manage configuration files
- 6.8 Display setup, Outputs
- 6.9 Display setup, Inputs
- 6.10 Audio settings
- 6.11 Wi-Fi settings
- 6.12 Wi-Fi settings, Wireless Client
- 6.13 Wi-Fi settings, Wireless Client, EAP-TLS
- 6.14 Wi-Fi settings, Wireless Client, EAP-TTLS
- 6.15 Wi-Fi settings, Wireless Client, PEAP
- 6.16 Wi-Fi settings, Wireless Client, WPA2-PSK
- 6.17 LAN settings
- 6.18 LAN Settings, Wired Authentication
- 6.19 LAN Settings, EAP-TLS security mode
- 6.20 LAN Settings, EAP-TTLS security mode
- 6.21 Service, mobile devices
- 6.22 Service, ClickShare API, remote control via API
- 6.23 XMS Server Integration
- 6.24 Services, SNMP
- 6.25 Services, Remote Button Pairing
- 6.26 Security, security level
- 6.27 Security, passwords
- 6.28 Security, HTTP Encryption
- 6.29 Status information Base Unit
- 6.30 Date & Time setup, manually
- 6.31 Date & Time setup, time server
- 6.32 Energy savers
- 6.33 Buttons
- 6.34 Buttons, External access point
- 6.35 Buttons, External access point, mode EAP-TLS
- 6.36 Buttons, External access point, mode EAP-TTLS
- 6.37 Buttons, External access point, mode PEAP
- 6.38 Buttons, External access point, mode WPA2-PSK
- 6.39 Blackboard
- 6.40 Firmware Update
- 6.41 Support & Updates, Troubleshoot, log settings
- 6.42 Factory defaults
- 7 Firmware updates
- 8 Troubleshooting
- 9 Environmental information
31R5900086 /06 ClickShare CSE-200+
LEDs behavior
Explanation
white blinking
• the Button is plugged in the laptop and initializing or waiting for
the user to start the ClickShare application.
• pairing/software update of the Button in the Base Unit is in
progress.
static white
• ClickShare is ready to start sharing your screen.
• pairing is done. You can now unplug the Button from the Base
Unit.
static red
• sharing your screen with the display
4
.
• pairing and software update is done. You can now unplug the
Button from the Base Unit.
red blinking
• an error occurred.
off (no light)
• the Button is not or not properly inserted into the USB port.
• the Button might be defective.
• the USB port or computer might be defective.
2.4 Mobile Device Support
Overview
The below list of Apps are supported by ClickShare and can be installed on your mobile device from Google
Play or Apple App Store.
Before you can use your mobile device with ClickShare, you have to connect the mobile device Wi-Fi with the
ClickShare Base Unit Wi-Fi. Follow the instructions as given in your mobile device user guide.
App
Used on
Logo
ClickShare App iOS
Android
Introduction to CSE-200+
4: While sharing content, the laptop will not go to standby. Once sharing is stopped, the laptop will again be capable of going to standly.