User's Manual

2. Introduction to CSE-800
3b
Fixture point for antenna WiFi 2
4 Reset
5
HDMI out 1 conne ctor
6 HDMI out 2 connector
7
LAN 1 connector (primary LA N interface)
8
LAN 2 connector (secondary LAN interface)
9 USB connectors 3.0
10 USB connectors 2.0
11 Audio connectors
12 Audio connectors
13 HDMI in 1 c onnector
14 HDMI in 2 c onnector
15 Kensington lock
Rocker switch
The rocker switch is used to power on and off the Base Unit.
• ToswitchontheBaseUnit,settherockerswitchto“I”.
• To shut down the system, set the r ocker switch to “0”.
Mechanical fixture points
The m echanical fixture points ar e loc ated at the bottom of the B ase Unit
Antenna
Four antennas are included in the CSE-800 box for concurrent dual band WiFi. To avoid damage during transport, they are not
pre-mounted.
The antenn as can rotate f or a better wireless connection.
Usage of antennas other than the ones provided with the unit are allowed within t he restrictions on usage of other antennas defined
by local regu lations. Barco does not take responsibility for damage or disturbance of other devices that may be caused by using a
diffe rent antenna. The use of a n active power am plifier is not allowed.
Antenna type : Dipole
Gain : Maximum 2 dBi peak gain in 2.4GHz and 5Ghz band
Ventilation grids
Ventilation grids are foreseen on the front s ide and on the back sides of the Base Unit.
8
R5900050 CLICKSHARE CSE-800 15/03/2017