User's Manual

2. Introduction to CSE-800
1 2 3
Image 2-5
Button layout
1 USB connec tor
2Button
3LEDring
Table 2-5
USB connector
Using t he USB connector the Button can be plugge d into a laptop (for sharing your screen) or the B ase U nit (for pairing the Button
to the Base Unit or updating its software).
Button
Click the B utton to display the c ontent of the lapto p’s screen o n the m eeting room display. Clicking the Button during the meeting
will toggle the sharing of the screen.
LED ring
The LED ring indicates the current status of your ClickShare.
LEDs behavior Explanation
white blinking
• the Button is plugged in the laptop and initializing or waiting for the user
to start the ClickShare application.
• pairing/software update of the B utton in the Ba se Unit is in progress.
static white
• ClickShare is ready to start sharing your s creen.
• pairing is done. You ca n now unplug the B utton from the Base Unit.
static red
• sharing your s creen with the display.
• pairing and software update is done. You can now unplug the Button
from the Base Unit.
red blinking
• an error occurred.
off (no light)
• the Button is not or not properly inserted into the US B port.
• the Button might be defective.
• the USB port or c omputer m ight b e defective.
Button label
The label at the bottom of the Button c ontains:
• the Barco logo
• the Barco part number
• the serial num ber
• the revision num ber
• markings for applicable standards
• markings for was te regulation
• “Made in...”
Handle the Button cab le with care. Rough handling might cause defects.
10 R5900050 CLICKSHARE CSE-800 15/03/2017