User's Manual

3. Getting started
3. GETTING STARTED
3.1 Activating the Base Unit
About power mode
You can power on and off the Base Unit and bring the s ystem in s tandby mode. In standby mode the system
mutes the output signal
to the displays. If your display supports this, it will automatically enter power saving mo de.
Power on the Base Unit or awake it from standby
1. When the Base Unit is shut down, s et the rocker switch at the back of the Base Unit to “I”.
1
Image 3-1
Power switch
2. If the system does not s tart up autom atically, push the standby button s hortly.
Image 3-2
Standby button
The system is now powered on.
Put the Base Unit i n standby
1. Push the standby button shortl
y image 3-2.
To shut down the B ase Unit
The Ba se Unit can be shut down in two ways :
1. Push the standby button until the B ase Unit shuts down image 3-2.
2. Set the rocker switch at the bac k of the B ase Unit to “0” image 3-1.
R5900050 CLICKSHARE CSE-800 15/03/2017
13