user manual

DX-700 • User’s Guide • Rev 02 141
4. Operation
DX-700 Management Menu Operations
5. The Tile Power Help Menu provides brief explanations of the associated output
problem, along with its possible causes and steps you can take to resolve it.
Figure 4-76. Tile Power Help Menu (sample)
6. If you cannot resolve the problem, please contact Barco Customer Service. In
Appendix C, refer to the “
Contact Information” section on page 204 for details.
7. Press {Previous} to return to the Tile Power Status Menu.
8. Press {Previous} again to return to the DX-700 Status Menu.
k~ãáåÖ=íÜÉ=auJTMM=råáí
Naming the DX-700 enables the unit to be easily recognized on a network, particularly
when there are multiple DX-700 units in use for a particular event.
 Use the following steps to name your DX-700:
1. From the Home Menu, press {DX-700 Management} to display the DX-700
Management Menu.
2. Press {Status} to display the Status Menu.
3. Press {Name} to display the Keyboard.
4. Type a name of up to 29 characters.
~ To save the name, press {Enter} on the Keyboard.
~ To exit the Keyboard without saving, press {Esc}.
5. The DX-700 Status Menu appears again. Press {Previous} to return to the
DX-700
Management Menu.